Friday, 30 October 2020 06:31 Written by

CFL PL4+

The new generation CFL PL4+ Cable Fault Pre-locator from SCOPE is the ultimate solution for locating underground cable faults in minimum time. It uses advanced technology for fault distance measurement which helps even an unskilled operator to locate the fault accurately up to 256 km.

CFL PL4+ portable Prelocator is used for identification of fault types in underground cables and the distance of fault. These products are designed to find out various types of faults in the cable such as Open Circuit, Short Circuit, Splice in Cable, High Resistance, Moisture Ingress, etc. Various modes of operation combined with advanced features offer the user the most effective solution for the job

Features

  • Compact, Lightweight and Rugged
  • User-friendly operation
  • Wide measurement range up to 256km
  • Highest measurement accuracy up to 0.025%
  • A high-speed sampling of 800MHz
  • Multiple waveform comparison with Subtraction mode to show waveform differences
  • Zoom function for detailed analysis of the waveform
  • Asynchronous interference & noise suppression
  • Adjustable Gain and Balance
  • Inbuilt Cable Library for easy setup and testing
  • Inbuilt memory to store 300 waveforms with USB connectivity
  • High resolution 10.4” colour TFT display
  • “Screenshot” function with image saving in JPG
  • Mains, as well as Inbuilt Rechargeable Battery, operated
  • Housed in IP67 class moulded case

Specifications

Parameters  CFL PL4+
Modes Of Operations

TDR: Time Domain Reflectometry / Low Voltage Pulse-echo

SIM / MIM / ARC : Secondary Impulse / Arc Reflection/Multiple Impulse

ICM / ICE: Impulse Current

Voltage Decay

Sampling  Rate  800MHz
Measurement Range  Up to 256 Km
Measurement Accuracy  0.025% to 0.2%
Resolution  0.01m
Pulse Amplitude (OCV) 18V and 86V selectable
Pulse Width 10nS to 100μS
Output Impedance 25Ω to 600Ω (Default 75Ω)
Velocity of Propagation (VoP)/Propagation Factor (PF) Settings    Parameters  VoP% PF  V/2
From  33.3% 3.000  50m/μS
To 99.9% 1.000 150m/μS
STEP 0.1% 0.001 0.1m/μS
Memory  300 Waveforms
Connectivity USB, Direct Download to Pen Drive 
Cable Library >100 Settings
Display 10.4" Colour TFT
Battery  Rechargeable Lithium-Ion, Suitable for 6-hour operation
Charger Input Supply 90V to 264V AC, 47 to 63 Hz, Single Phase
Environmental -10°C to +50°C, up to 95% RH (Non-Condensing)
Dimension 339mm x 295mm x 152mm
Weight  3.7 Kg
Friday, 30 October 2020 09:36 Written by

CFL PL3+

The new generation CFL PL3+ Cable Fault Pre-locator from SCOPE is the ultimate solution for locating underground cable faults in minimum time. It uses advanced technology for fault distance measurement which helps even an unskilled operator to locate the fault accurately up to 128 km.

CFL PL3+ portable Prelocator is used for identification of fault types in underground cables and the distance of fault. These products are designed to find out various types of faults in the cable such as Open Circuit, Short Circuit, Splice in Cable, High Resistance, Moisture Ingress, etc. Various modes of operation combined with advanced features offer the user the most effective solution for the job.

Features

  • Compact, Lightweight and Rugged
  • User-friendly operation
  • Wide measurement range up to 128km
  • Highest measurement accuracy up to 0.01%
  • A high-speed sampling of 800MHz
  • Multiple waveform comparison with Subtraction mode to show waveform differences
  • Zoom function for detailed analysis of the waveform
  • Asynchronous interference & noise suppression
  • Adjustable Gain and Balance
  • Inbuilt Cable Library for easy setup and testing
  • Inbuilt memory to store 300 waveforms with USB connectivity
  • Equipped with 3 TDR channels for analysing 3 phase cable in single connections
  • High resolution 5.7” colour TFT display
  • Mains, as well as Inbuilt Rechargeable Battery, operated
  • Housed in IP67 class moulded case

Specifications

Parameters  CFL PL3+
Modes Of Operations

TDR: Time Domain Reflectometry / Low Voltage Pulse-echo

SIM / MIM / ARC : Secondary Impulse / Arc Reflection/Multiple Impulse

ICM / ICE: Impulse Current

Voltage Decay

Sampling  Rate  800MHz
Measurement Range  Up to 128Km
Measurement Accuracy  0.01% to 0.2%
Resolution  0.01m
Pulse Amplitude (OCV) 10V and 45V selectable
Pulse Width 10nS to 100μS
Output Impedance 25Ω to 600Ω
Velocity of Propagation (VoP)/Propagation Factor (PF) Settings    Parameters  VoP% PF  V/2
From  33.3% 3.000  50m/μS
To 99.9% 1.000 150m/μS
STEP 0.1% 0.001 0.1m/μS
Memory  300 Waveforms
Connectivity USB, Direct Download to Pen Drive 
Cable Library >100 Settings
Display 5.7" Colour TFT
Battery  Rechargeable Lithium-Ion, Suitable for 6-hour operation
Charger Input Supply 90V to 264V AC, 47 to 63 Hz, Single Phase
Environmental -10°C to +50°C, up to 95% RH (Non-Condensing)
Dimension 270mm x 240mm x 120mm
Weight  2.5 Kg
Wednesday, 06 January 2021 11:04 Written by

CFL PP3+

The new generation CFL PP3+ Cable Fault Pin Pointer cum route tracer from SCOPE is the ultimate solution for locating of underground cable faults in minimum time by tracing cable route. It uses an advanced technology which helps even an unskilled operator to locate the fault accurately.

For pinpointing it is used along-with CFL SG Series Surge Generators and for route tracing it is used along-with CFL AG Series Audio Frequency Generators. Advanced technology with features like time-lapse measurement, makes it a tool that can tackle complicated faults easily.

Features

  • Compact, Lightweight and Rugged
  • Operation via User Friendly 5.7” colour Touchscreen Display
  • Universal Receiver used for Route Tracing and Pinpointing
  • Backlit facility with intensity control for ease of viewing in direct sunlight
  • Simultaneous display of Magnetic and Acoustic waveforms
  • Time-lapse / delay measurement facility
  • Automatic Fault Point Indication using Coincidence Method
  • Noise suppression filters to eliminate external influences
  • Mute function for headphones to disable noise while moving
  • Route guidance (Compass) feature during Pinpointing
  • Detection of live loaded cable (50Hz frequency)
  • Specially designed lightweight, neck carrying case ensuring minimum strain to the operator
  • Inbuilt Rechargeable Battery
  • Water-resistant and dustproof design
  • Supplied in an IP67 Class Molded Case

Specifications

Parameters  CFL PP3+
Channels Acoustic and Magnetic (Dual Channel)
Operating Principle Coincidence Method
Gain Up to 120dB adjustable for Acoustic & Magnetic
Volume limitation warning 84dB
Headphone Jack  3.5mm
O/P impedance of headphone 8Ω to 72Ω (32Ω is recommended)
Acoustic Channel Bandwidth 70Hz to 3000Hz with automatic filtering
Magnetic Channel Bandwidth 120Hz to 20kHz Auto-tuned
Battery 11.1V Lithium-Ion Rechargeable
Charger Input 90V to 270V AC, 50/60 Hz, Single Phase
Operating Time 10 Hours Min (Approx)
Display  5.7'', 320 x 240 pixel, Colour, TFT Touch Screen
Environmental -20°C to 55°C, 95% RH (Non-Condensing)
Dimensions of Receiver 231mm x 90mm x 135mm
Weight of Receiver 1.4 kg

Friday, 30 October 2020 09:00 Written by

CFL PL2+

The new generation CFL PL2+ Cable Fault Prelocator from SCOPE is the ultimate solution for locating underground cable faults in minimum time. It uses advanced technology for fault distance measurement which helps even an unskilled operator to locate the fault accurately up to 50 km.

CFL PL2+ portable Prelocator is used for identification of fault types in underground cables and the distance of fault. These products are designed to find out various types of faults in the cable such as Open Circuit, Short Circuit, Splice in Cable, High Resistance, Moisture Ingress, etc. Various modes of operation combined with advanced features offer the user the most effective solution for the job

Features

  • Compact, Lightweight and Rugged
  • User-friendly operation
  • Wide measurement range up to 50km
  • Highest measurement accuracy up to 0.04%
  • A high-speed sampling of 100MHz
  • Multiple waveform comparison with Subtraction mode to show waveform differences
  • Zoom function for a detailed review of the waveform
  • Asynchronous interference & noise suppression
  • Adjustable Gain and Balance
  • Inbuilt Cable Library for easy setup and testing
  • Inbuilt memory to store 100 waveforms
  • RS-232 port for communication
  • High resolution 5.7” Monochrome LCD display
  • Mains, as well as Inbuilt Rechargeable Battery, operated
  • Housed in IP67 class moulded case

Specifications

Parameters  CFL PL2+
Modes Of Operations

TDR: Time Domain Reflectometry / Low Voltage Pulse-echo

SIM / MIM / ARC : Secondary Impulse / Arc Reflection/Multiple Impulse

Sampling  Rate  100MHz
Measurement Range  Up to 50 Km
Measurement Accuracy  0.04% to 0.4%
Resolution  0.01m
Pulse Amplitude (OCV) 10V
Pulse Width 10nS to 100μS
Output Impedance 25Ω to 600Ω (Default 75Ω)
Velocity of Propagation (VoP)/Propagation Factor (PF) Settings   Parameters  PF  V/2
From  1.000  50m/μS
To 3.000 150m/μS
Memory  100 Waveforms
Connectivity RS-232
Cable Library >100 Settings
Display 5.7" Monochrome, LCD
Battery  Rechargeable Lithium-Ion, Suitable for 8-hour operation
Charger Input Supply 90V to 264V AC, 47 to 63 Hz, Single Phase
Environmental -10°C to +50°C, up to 95% RH (Non-Condensing)
Dimension 270mm x 240mm x 120mm
Weight  2.5 Kg
Tuesday, 05 January 2021 09:18 Written by

Surge Generator

Surge Generator is the backbone of underground cable fault locator test systems. Surge Generator is used with a Prelocator for fault distance measurement and also used with a PinPointer for pinpointing the fault spot.

SCOPE offers CFL SG Series Surge Generators up to 32kV and 2000 Joules. They are compact, rugged, user friendly and have all safety features in place. They are the ideal choice for fault location on all type of power cables. It can also be mounted in a cable test van for quick fault location if one wants to opt for optional van mounted configuration.

For prelocation it is used in ICM (Impulse Current Method) and SIM (Secondary Impulse Method) / MIM /ARC modes. In this modes, one also needs to use SIM Filter for stabilising the arc at fault. For pinpointing it is used as Thumper to create magnetic as well as acoustic signal across the fault, which is sensed by Pin Pointer. 

 

Features

  • Compact, Lightweight and housed in a rugged aluminium case
  • Available with 16kV and 32kV Models with energy options such as 500J, 1000J, 1500J & 2000J
  • Ideal choice for fault location on all type of power cables
  • Backbone of Cable Fault Locator System
  • Generates short duration high voltage surge for fault break down
  • Used to determine the fault distance in conjunction with Prelocator unit
  • Repetitive surges applied for pinpointing the exact fault location in conjunction Pinpointing set
  • Supports SIM/ARM/MIM method for locating High resistance and flashing faults along with Prelocator and SIM Filter
  • Available with optional modes such as DC Hipot, Burn Down and Sheath Fault Locator Mode

Specifications

Parameters  CFL SG1610 / SG 1620 CFL SG3210/SG3215/SG3220
Output Voltage Range   0- 4, 0-8, 0-16kV 0-8, 0-16, 0-32kV
Output Energy 1000J /2000J 1000J / 1500J /2000J
Impulse Period Sequence Single Impulse / 3S / 6S / 9S or other as desired
Measurement Mode Supported ICM (Impulse Current Method), SIM (Secondary Impulse Method) / MIM / ARC
Ouput Indiaction  Moving Coil Meters
Power  230V AC ±10%, 50Hz
Housing Elegant, rugged aluminium housing with trolley mounting
Dimension 484 x 360 x 580 mm 700 X 700 X 880 mm
Weight  65 kg / 70 kg 95 kg / 105 kg / 115 kg

Optional 'DC HiPOT' Mode

Voltage  0-16kV 0-32kV
Current  up to 12mA up to 24mA

Optional 'Burn Down' Mode 

Voltage  0- 4, 0-8, 0-16kV 0-8, 0-16, 0-32kV
Current  0-90, 0-60, 0-30mA in resp ranges 0-240, 0-120, 0-60mA in resp ranges

Optional 'Sheath Fault Locator' Mode

Voltage 0-8kV
Current  0-60mA 0-240mA
Test Timing Interval Single Impulse / 3S / 6S / 9S or other as desired

 

Tuesday, 05 January 2021 11:22 Written by

Cable Identification System

After excavation, sometimes it is confusing to identify the right cable from a bunch of cables. Cable Identification is very important for the safety of field personnel – Cutting a wrong cable can be fatal. So, we require a Cable Identification System to identify the wanted cable.

Cable Identification is the most critical and safety-related sequence during all the procedure of Cable Fault Location. The correct identification of a cable out of a bundle of cables, where most of them can be in service, has to be carried out not only carefully, but also by means of an instrument widely eliminating the possibility of human error or misinterpretation.

The Cable Identification System, CFL CIS from SCOPE is the ultimate solution for identifying wanted (dead) cable from a bunch of cables in a trench, pit or cable rack. The SCOPE’s Cable Identification System, CFL CIS is designed to fulfil these most important safety aspects

Features

  • Compact, Lightweight and Rugged
  • User Friendly LED Indication for Right & Wrong Cable Identification from multiple cables
  • Thin and Flexible Current Clamp for easy insertion between closely mounted Cables
  • 10 Stage amplifier setting for better signal identification
  • Transmitter operation through Mains as well as In-built rechargeable battery
  • Transmitter housed in IP67 class moulded case
  • Neck Belt arrangement for easy carrying of Receiver

Specifications

Parameters  CIS 
Pulse Amplitude Selectable between 100A (55V) / 60A (36V)
Pulse Sequence 10 or 20 or 30 pulses/min, User configurable
Pulse Modulation  Alternative pulse at 1s and 2.5s
Pulse Width 72ms
Display 4 line x 20 characters backlit LCD
Power 90V to 265V AC, 50/60Hz or In-built 11.1V Lithium Ion Rechargeable battery
Battery Operating time 6 Hours Min.
Environmental  -20°C to +55°C, 95% RH (Non-Condensing)
Dimensions & Weight 339mm x 295mm x 152mm, 6 Kg approx

 

Parameters  CIS-R
Display Type LED Scale
Flexible Clamp 150mm Diameter
Sensitivity 100% at 31Ω loop resistance
Amplifier 10 stage gain setting
Power 11.1V Lithium-Ion Rechargeable Battery 
Operating Time 8 Hours Min
Environmental  -20°C to +55°C, 95% RH (Non-Condensing)
Dimensions & Weight 210mm x 124mm x 51mm, 0.7 Kg approx

 

Thursday, 14 July 2022 07:07 Written by

CFL SG 3220

Surge Generator is the backbone of underground cable fault locator test systems. Surge Generator is used with a Prelocator and SIM Filter for fault distance measurement and also used with PinPointer Set for pinpointing the exact fault spot.

SCOPE offers CFL SG 3220, Surge Generator with output of 32kV and 2000 Joules. It is ideal choice for fault location on all types of power cables from LV to EHV. CFL SG Series is equipped with different Protections, Interlocks and Auto-discharge Facility to ensure User Safety during operation. User Friendly controls, adequate form factor, contact free HV terminations makes this CFL SG Series most durable and best-designed sets in the segment.

Features

  • Compact, Lightweight, and housed in rugged aluminum case
  • Ideal choice for fault location on all type of power cables
  • Backbone of Cable Fault Locator System
  • Generates short duration high voltage surge for fault break down
  • Built-in Current Coupler to determine the fault distance in conjunction with Prelocator unit
  • Repetitive surges applied for pinpointing the exact fault location in conjunction Pinpointing set
  • Supports SIM/ARM/MIM method for locating High resistance and flashing faults along with Prelocator and SIM Filter from CFL Series
  • Available with optional modes such as DC Hi-Pot, Burn Down and Sheath Fault Location Mode
  • Multiple options in a single instrument to avoid carrying several heavy instruments to the site
  • Easy setup and intelligent protections make high voltage testing safe & reliable
  • Compatible with other models of SCOPE make CFL Series

Specifications

Parameter CFL SG 3220
Output Voltage Ranges 0 – 8kV / 16kV / 32kV selectable
Output Energy Max. 2000J in each voltage range

Impulse Sequence (Surge Rate)

Single Impulse (Manual) / 3 Sec / 6 Sec / 9 Sec or        Single Impulse (Manual) / 2 Sec / 4 Sec / 8 Sec (Optional)

Output Indication Moving Coil Analog Meter for Output Voltage measurement Moving Coil Analog Meter for Leakage Current measurement in Optional DC Modes
Measurement Accuracy ±5% of selected range
Input Supply 230V AC ± 10%, 50/60Hz ± 10%, Single Phase, 1.8 kVA max.
Cooling Type Air Cooled
Dimensions 835 x 810 x 880 mm
Weight  (without trolley and test leads)

Without Optional DC Modes: 160kg approx.

With Optional DC Modes: 165kg approx.

Environmental (Operation)

0°C to 50°C, up to 95% RH (Non-Condensing)

Environmental (Storage)

-10°C to 55°C, up to 95% RH (Non-Condensing)

Optional DC Modes Voltage Current Timer / Pulse Ratio*
Hi-Pot 0-32kV 6/12/24mA 5/10/15min
Burn Down 0-8/16/32kV 240/120/60mA 3min
Sheath Fault 0-8kV 240mA *3/6/9s On & 100ms Off
Thursday, 14 July 2022 08:26 Written by

CFL SG 3210

Surge Generator is the backbone of underground cable fault locator test systems. Surge Generator is used with a Prelocator and SIM Filter for fault distance measurement and also used with PinPointer Set for pinpointing the exact fault spot.

SCOPE offers CFL SG 3210, Surge Generator with output of 32kV and 1000 Joules. It is ideal choice for fault location on all types of power cables from LV to EHV. CFL SG Series is equipped with different Protections, Interlocks and Auto-discharge Facility to ensure User Safety during operation. User Friendly controls, adequate form factor, contact free HV terminations makes this CFL SG Series most durable and best-designed sets in the segment.

Features

  • Compact, Lightweight, and housed in rugged aluminum case
  • Ideal choice for fault location on all type of power cables
  • Backbone of Cable Fault Locator System
  • Generates short duration high voltage surge for fault break down
  • Built-in Current Coupler to determine the fault distance in conjunction with Prelocator unit
  • Repetitive surges applied for pinpointing the exact fault location in conjunction Pinpointing set
  • Supports SIM/ARM/MIM method for locating High resistance and flashing faults along with Prelocator and SIM Filter from CFL Series
  • Available with optional modes such as DC Hi-Pot, Burn Down and Sheath Fault Location Mode
  • Multiple options in a single instrument to avoid carrying several heavy instruments to the site
  • Easy setup and intelligent protections make high voltage testing safe & reliable
  • Compatible with other models of SCOPE make CFL Series

Specifications

Parameter CFL SG 3210
Output Voltage Ranges 0 – 8kV / 16kV / 32kV selectable
Output Energy Max. 1000J in each voltage range

Impulse Sequence (Surge Rate)

Single Impulse (Manual) / 3 Sec / 6 Sec / 9 Sec or

Single Impulse (Manual) / 2 Sec / 4 Sec / 8 Sec (Optional)

Output Indication Moving Coil Analog Meter for Output Voltage measurement Moving Coil Analog Meter for Leakage Current measurement in Optional DC Modes
Measurement Accuracy ±5% of selected range
Input Supply

230V AC ± 10%, 50/60Hz ± 10%, Single Phase,

1.8 kVA max.

Cooling Type Air Cooled
Dimensions 835 x 810 x 880 mm
Weight  (without trolley and test leads)

Without Optional DC Modes: 150kg approx.

With Optional DC Modes: 155kg approx.

Environmental (Operation)

0°C to 50°C, up to 95% RH (Non-Condensing)

Environmental (Storage)

-10°C to 55°C, up to 95% RH (Non-Condensing)

Optional DC Modes Voltage Current Timer / Pulse Ratio*
Hi-Pot 0-32kV 6/12/24mA 5/10/15min
Burn Down 0-8/16/32kV 240/120/60mA 3min
Sheath Fault 0-8kV 240mA *3/6/9s On & 100ms Off
Thursday, 14 July 2022 08:45 Written by

CFL SG 1610

Surge Generator is the backbone of underground cable fault locator test systems. Surge Generator is used with a Prelocator and SIM Filter for fault distance measurement and also used with PinPointer Set for pinpointing the exact fault spot.

SCOPE offers CFL SG 1610, Surge Generator with output of 16kV and 1000 Joules. It is ideal choice for fault location on all types of power cables from LV to EHV. CFL SG Series is equipped with different Protections, Interlocks and Auto-discharge Facility to ensure User Safety during operation. User Friendly controls, adequate form factor, contact free HV terminations makes this CFL SG Series most durable and best-designed sets in the segment

Features

  • Compact, Lightweight, and housed in rugged aluminum case
  • Ideal choice for fault location on all type of power cables
  • Backbone of Cable Fault Locator System
  • Generates short duration high voltage surge for fault break down
  • Built-in Current Coupler to determine the fault distance in conjunction with Prelocator unit
  • Repetitive surges applied for pinpointing the exact fault location in conjunction Pinpointing set
  • Supports SIM/ARM/MIM method for locating High resistance and flashing faults along with Prelocator and SIM Filter from CFL Series
  • Available with optional modes such as DC Hi-Pot, Burn Down and Sheath Fault Location Mode
  • Multiple options in a single instrument to avoid carrying several heavy instruments to the site
  • Easy setup and intelligent protections make high voltage testing safe & reliable
  • Compatible with other models of SCOPE make CFL Series

Specifications

Parameter CFL SG 1610
Output Voltage Ranges 0 – 4kV / 8kV / 16kV selectable
Output Energy Max. 1000J in each voltage range

Impulse Sequence (Surge Rate)

Single Impulse (Manual) - 3 Sec / 6 Sec / 9 Sec or

Single Impulse (Manual) - 2 Sec / 4 Sec / 8 Sec (Optional)

Output Indication Moving Coil Analog Meter for Output Voltage measurement Moving Coil Analog Meter for Leakage Current measurement in Optional DC Modes
Measurement Accuracy ±5% of selected range
Input Supply

230V AC ± 10%, 50/60Hz ± 10%, Single Phase,

1.2 kVA max.

Cooling Type Air Cooled
Dimensions

680 x 480 x 660mm without Optional DC Modes 

835 x 810 x 880 mm with Optional DC Modes

Weight  (without trolley and test leads)

Without Optional DC Modes: 150kg approx.

With Optional DC Modes: 155kg approx.

Environmental (Operation)

0°C to 50°C, up to 95% RH (Non-Condensing)

Environmental (Storage)

-10°C to 55°C, up to 95% RH (Non-Condensing)

Optional DC Modes Voltage Current Timer / Pulse Ratio*
Hi-Pot 0-16kV 3/6/12mA 5/10/15min
Burn Down 0-4/8/16kV 90/60/30mA 3min
Sheath Fault 0-8kV 60mA *3/6/9s On & 100ms Off
Page 2 of 5