Monday, 24 January 2022 07:00 Written by 
Rate this item
(0 votes)

MD 5KVr

MD 5KVr

The digital insulation tester model MD5KVR is TENTECH's cutting edge insulation analyzer equipment and it is one of the most complete and sophisticated available in the international market. A software allows for further analysis of tests results, including features such as graphical representation and automatic report generation. Its proven technology provides safe, reliable and accurate measurements of insulation resistances up to 5 TΩ, with 4 preselected test voltages, 500 V -1 kV - 2,5 kV - 5 kV. Other test voltages, from 50 V to 5 kV, can be selected in 25 V or 500 V steps.

A state-of-the-art microprocessor controls the equipment operation and enables the incorporation of advanced features which make measurements easier: auto-range selection, AC/DC voltmeter, automatic measurement of absorption index, polarization index, leakage current and capacitance, timer enabling programming of test duration, configurable pass-fail test, dielectric discharge, ramp test, step voltage test, built-in printer, real time clock and calendar.

Measured values are transmitted through the USB interface and are printed in the built-in printer as a registration of the performed test. Furthermore, the measured values are stored in a non-volatile internal memory. Up to 16,000 measured values may be stored to be transferred afterward to a computer running the T-Logger program. This software allows a further analysis of the test results, including a graphical representation and automatic report generation. The real time clock and calendar, and the sequential test number, facilitates the identification of each test, and the organization of a predictive maintenance system by trend analysis.

The MD5KVR is powered by a rechargeable LFP battery. The cabinet is strong and lightweight, easy to carry, impact-resistant and suitable to be used under severe weather conditions. Thus the megohmmeter supplies very reliable and accurate measurements both in laboratory and out in the field.

 

Features

 

  • Microprocessor-controlled
  • Insulation resistances up to 5 TΩ
  • Auto-range
  • Automated tests: Absorption index, Polarization index, Capacitance, Leakage current and AC/DC voltmeter
  • IP65 protection 
  • Switchable filter to remove external noise interference
  • Real time clock and calendar
  • Built-in printer, internal memory for up to 16,000 measured values
  • Software for data management

Specifications

Specification  MD 5KVR
Test voltage

500 V - 1 kV - 2,5 kV - 5k V directly, one button selectable.

50 V to 5 kV in 25 V or 500 V steps. DC, negative.

Maximum resistance reading

5 TΩ @ 5 kV 

250GΩ @250V

DC Voltmeter

 15 V up to 1,000 Vdc.

Accuracy: ±(5% of reading + 3 digits).

AC voltmeter

 15 V up to 1000 V r.m.s.

Accuracy: ±(5% of reading + 3 digits)

 Overvoltage Category   CAT -III 600V
 Capacitance measurement

50 nF up to 10 µF @ 500 V.

50 nF up to 5 µF @ 1,000 V.

30 nF up to 2 µF @ 2,500 V.

30 nF up to 1 µF @ 5,000 V.

Accuracy: ±10% of reading ± 3 digits.

 Short circuit current  Max. 3 mA
 Test voltage accuracy  ± 3% of nominal test voltages on 10 GΩ
 Insulation tester basic accuracy

± 5% of reading from 1 MΩ to 1 TΩ @ 5 kV.

± 20% of reading from 1 TΩ to 5 TΩ @ 5 kV.

(for lower test voltages, the upper limit will be reduced proportionally).

± 20% of reading ± 5 digits 10 from kΩ to 100 kΩ.

± 10% of reading ± 5 digits 100 from kΩ to 1 MΩ

Advanced features

Ramp test.

Dielectric discharge.

Step voltage test.

Automated polarization index calculation.

Automated dielectric absorption ratio calculation.

Programmable pass-fail test.

16,000 readings memory.

Switchable filter to remove external noise interference.

Read 4131 times Last modified on Thursday, 17 February 2022 06:11
More in this category: « MD 10KVR MD 5060x »