Super User

Super User

SCOPE introduces its next generation of iconic SCOT Series Circuit Breaker Time Interval Meters in all new super light avatars, based on cutting edge microcontroller & embedded technology.

User can choose from two models, SCOT M3K+ and SCOT MXP+ depending on type of testing to be done on circuit breakers.

Features

  • A radically new design makes SCOT the lightest available CB Time Interval Meter.
  • High sampling frequency of up-to 10 KHz offers high timing resolution of 0.1 mS.
  • Mains as well as rechargeable Li-ion battery operated. In built battery monitor and cut off circuit for protection against battery deep discharge.
  • In built real time clock, memory and printer*. Test time stamping on each record enables time references for future use.
  • PC Downloading & Analysis including ‘Trend Analysis’ is possible with “CData SCOT” Software supplied with kit.
  • Instrument debug options like contact status check, command check, memory check, printer check*, PC downloading check are provided.
  • Simple operation. Tests can be conducted even by technicians.
  • Supplied with rugged test lead set, suitable for testing EHV CBs.
  • Enclosed in ultra rugged IP67 class hard molded case.The instrument is supplied with CData software CD, Calibration Certificate, and Test leads suitable for testing of EHV class circuit breakers.
  • Type Tested as per IEC 60068, IEC 61326 & IEC 61010-1. CE marked

Note: * - These features are available only in SCOT MXP+.

Specifications

Parameter SCOT M3K+ SCOT MXP+
Contact Timing Channels 3 (Main contacts of 3 poles connected end to end, simultaneously) 12 ( Up-to 2 Main + 2 PIR contacts per pole, 3 poles simultaneously, i.e. 6 Main + 6 PIR contacts simultaneously)
Sampling Speed 10kC, 5kC, 2kC,1kC & 100C, Selectable
Timing Range 1Sec, 2Sec, 5Sec, 10Sec & 100Sec respectively for above Sampling Speeds
Resolution 0.1 mSec, 0.2 mSec, 0.5 mSec, 1 mSec & 10 mSec respectively for above Sampling Speeds
Accuracy Value ± 0.05% ± 1 digit
Breaker Control Two solid state contacts rated at 35A, 300V AC/DC for breaker operation
Trigger Options Close, Open, Close-Open
Display 4 Line X 20 character backlit LCD
Printer In-built, 58 mm thermal printer (Available only in SCOPT MXP+)
Keypad 5 keys
Memory 1 MB, 100 records, Internal
Inbuilt Battery Li-Ion, 11.1 V, 4 Ah
Battery Charger Input Supply - 100 to 300 VAC, 50/60 Hz ± 10% Output Voltage - 13.5 VDC, 1000 mA
Communication Port USB
Software CData SCOT - For PC Downloading & Analysis, Windows based
Environment 0 to 50°C, Upto 95% RH (Non condensing)
Dimensions 300 x 250 x 200 mm
Instrument Weight 5 kg
  • Breaker Control: Two solid state contacts rated at 35A, 300V AC/DC for breaker operation (Close & Trip).
  • Trigger Options: Open Close, C-O, O-C, O-C-O, and delay between operations configurable.
  • Sampling Speed: 20kC, 10kC, 5kC, 2kC, 1kC selectable.
  • Travel Channels: For linear / rotary resistive transducers. 0-5V DC excitation source in-built.
  • Communication Port : Ethernet port for communication between laptop and instrument
  • Power : 230V AC + 15%, 50Hz + 10%, 70VA Approx
  • Test Leads: Suitable to test Loco VCBs. Leads supplied are of suitable length, thickness, insulation quality & mechanical strength. They have colour coded terminators, quick-fit type rugged clamps & identification labels.
  • Supplied with suitable Test Leads & aluminium transport case

SCOPE introduces its next generation of iconic SCOT Series Circuit Breaker Time Interval Meters in all new super light avatars, based on cutting edge microcontroller & embedded technology.

User can choose from two models, SCOT M3K+ and SCOT MXP+ depending on type of testing to be done on circuit breakers.

Features

  • A radically new design makes SCOT the lightest available CB Time Interval Meter.
  • High sampling frequency of up-to 10 KHz offers high timing resolution of 0.1 mS.
  • Mains as well as rechargeable Li-ion battery operated. In built battery monitor and cut off circuit for protection against battery deep discharge.
  • In built real time clock, memory and printer*. Test time stamping on each record enables time references for future use.
  • PC Downloading & Analysis including ‘Trend Analysis’ is possible with “CData SCOT” Software supplied with kit.
  • Instrument debug options like contact status check, command check, memory check, printer check*, PC downloading check are provided.
  • Simple operation. Tests can be conducted even by technicians.
  • Supplied with rugged test lead set, suitable for testing EHV CBs.
  • Enclosed in ultra rugged IP67 class hard molded case.The instrument is supplied with CData software CD, Calibration Certificate, and Test leads suitable for testing of EHV class circuit breakers.
  • Type Tested as per IEC 60068, IEC 61326 & IEC 61010-1. CE marked

Note: * - These features are available only in SCOT MXP+.

Specifications

Parameter SCOT M3K+ SCOT MXP+
Contact Timing Channels 3 (Main contacts of 3 poles connected end to end, simultaneously) 12 ( Up-to 2 Main + 2 PIR contacts per pole, 3 poles simultaneously, i.e. 6 Main + 6 PIR contacts simultaneously)
Sampling Speed 10kC, 5kC, 2kC,1kC & 100C, Selectable
Timing Range 1Sec, 2Sec, 5Sec, 10Sec & 100Sec respectively for above Sampling Speeds
Resolution 0.1 mSec, 0.2 mSec, 0.5 mSec, 1 mSec & 10 mSec respectively for above Sampling Speeds
Accuracy Value ± 0.05% ± 1 digit
Breaker Control Two solid state contacts rated at 35A, 300V AC/DC for breaker operation
Trigger Options Close, Open, Close-Open
Display 4 Line X 20 character backlit LCD
Printer In-built, 58 mm thermal printer (Available only in SCOPT MXP+)
Keypad 5 keys
Memory 1 MB, 100 records, Internal
Inbuilt Battery Li-Ion, 11.1 V, 4 Ah
Battery Charger Input Supply - 100 to 300 VAC, 50/60 Hz ± 10% Output Voltage - 13.5 VDC, 1000 mA
Communication Port USB
Software CData SCOT - For PC Downloading & Analysis, Windows based
Environment 0 to 50°C, Upto 95% RH (Non condensing)
Dimensions 300 x 250 x 200 mm
Instrument Weight 5 kg
  • Breaker Control: Two solid state contacts rated at 35A, 300V AC/DC for breaker operation (Close & Trip).
  • Trigger Options: Open Close, C-O, O-C, O-C-O, and delay between operations configurable.
  • Sampling Speed: 20kC, 10kC, 5kC, 2kC, 1kC selectable.
  • Travel Channels: For linear / rotary resistive transducers. 0-5V DC excitation source in-built.
  • Communication Port : Ethernet port for communication between laptop and instrument
  • Power : 230V AC + 15%, 50Hz + 10%, 70VA Approx
  • Test Leads: Suitable to test Loco VCBs. Leads supplied are of suitable length, thickness, insulation quality & mechanical strength. They have colour coded terminators, quick-fit type rugged clamps & identification labels.
  • Supplied with suitable Test Leads & aluminium transport case

SCOPE introduces CBSCOPE – Loco Circuit Breaker Test System; the ultimate solution for testing Loco Circuit Breakers of all types. CBSCOPE is the most complete analyzer for checking the dynamic performance of Loco VCBs; both Single bottle and Double bottle.

Features

  • CBSCOPE Measures timings, bounce, and simultaneity of contacts
  • Analyses contact travel characteristics for speed, contact gap, overtravel and rebound.
  • Displays settings, graphical and tabulated test results.
  • Incorporates powerful and practical Windows™ based Test Manager Software to control & operate instrument; also to view, analyse and handle graphical test data on a laptop at high resolution.
  • Specially designed test commands for all Loco VCB testing.
  • Analysis of test results provides inputs to assess and correct:
    • Settings for contact timings.
    • Closing and Opening speeds, over-travel, rebound and contact wipe.
    • Trip/Close release mechanism settings.

Specifications

Channels Configuration Range Resolution Accuracy
Contact Timing 3: 2 for double bottle VCB, 1 spare Measurement duration 1 mS to 40 Sec at 1 kC, 0.05 mS to 2 Sec at 20 kC 1 mS at 1 kC 0.05 mS at 20 kC Value ± 0.05% ± resolution
Auxiliary Contacts 2: Trip/ Holding & Close Coil current 1, 2, 5, 10, 25 A DC 0.1% of range at 1A 0.004% of range Value ± 0.5% ± resolution
Voltage (Travel) 2: Travel characteristics 0-5 V DC 1.2 mV at 25A Value ± 0.5% ± resolution
  • Breaker Control: Two solid state contacts rated at 35A, 300V AC/DC for breaker operation (Close & Trip).
  • Trigger Options: Open Close, C-O, O-C, O-C-O, and delay between operations configurable.
  • Sampling Speed: 20kC, 10kC, 5kC, 2kC, 1kC selectable.
  • Travel Channels: For linear / rotary resistive transducers. 0-5V DC excitation source in-built.
  • Communication Port : Ethernet port for communication between laptop and instrument
  • Power : 230V AC + 15%, 50Hz + 10%, 70VA Approx
  • Test Leads: Suitable to test Loco VCBs. Leads supplied are of suitable length, thickness, insulation quality & mechanical strength. They have colour coded terminators, quick-fit type rugged clamps & identification labels.
  • Supplied with suitable Test Leads & aluminium transport case

SCOPE offers HISAC Swift - Circuit Breaker Operational Analyser for checking the performance of the circuit breakers. The Analyser contains various intelligent measuring modules designed for measuring parameters such as contact timings of Main/PIR & Auxiliary contacts, Close/Trip Coil Current characteristics and Static Contact Resistance of R, Y & B poles simultaneously. The results can be directly viewed on the TFT touch screen display in graphical as well as numerical form. It is possible to print the graph on built-in thermal printer or download record to PC for further analysis on CPLOT software. This all in one instrument is best suited for gang operated CBs.

Features

  • Operations: C, O, C-O, O-C, O-C-O with configurable delays and Static Contact Resistance.
  • Setup: Breaker information data entry and system settings are possible through the touch screen keyboard, which automatically invokes when this menu is selected.
  • Contact Timing: Channels for 3 Main and 3 PIR Contacts with 0.05mS resolution.
  • One internal channel to measure Close and Trip coil current.
  • Three multiplexed channels to measure Contact resistance with 0.1μΩ resolution and range up to 2Ω.
  • TFT color graphical display with touch screen. Displays the menu which is operated through touch screen.
  • Graph is displayed after the operation with full resolution.
  • Printout: Through inbuilt, 56mm thermal printer is provided for printing test header, graph and calculation.
  • Memory: Provided with 2 MB inbuilt memory. Can store up to 75 records.
  • Windows based CPLOT software to download the record to PC through USB connectivity for further analysis & storage.
  • Type Tested as per IEC 60068, IEC 61326 & IEC 61010-1. CE marked

Specifications

Channels Configuration Range Resolution Accuracy
Contact Status  6: 1 main + 1 PIR per pole, 3 poles Simultaneously  Measurement duration 1mS to 4S @ 1kC, 0.05mS to 200mS @ 20kC 1mS @ 1kC 0.05mS @ 20kC Value ±0.05%
± resolution
Auxiliary Contacts 2: Dry / Wet Selectable 15 to 300V DC (for Wet Channels) 1mS @ 1kC 0.05mS @ 20kC Value ± 0.05% ± resolution
Coil Current 1: Trip / Close coil current 1, 2, 5, 10, 25, 50A DC 0.1% of selected range Value ± 1% ± resolution
Contact Res. Channels 3: Multiplexed 3 Channels.10A Max. 200μΩ, 2000μΩ, 20mΩ, 200mΩ & 2Ω, auto ranging 0.1μΩ @200μΩ 1% of range ± resolution
  • Breaker Control: Two solid state contacts rated at 50A, 300V AC/DC for breaker operation.
  • Sampling Speed: 20kC, 10kC, 5kC, 2kC & 1kC selectable.
  • Plot Length:200mS at 20kC, 400mS at 10kC, 800mS at 5kC, 2000mS at 2kC and 4000mS at 1kC
  • Display : 320 x 240 pixel 5.7” color TFT LCD with LED back light, touch screen
  • Printer: 56 mm paper width, thermal printer
  • Environment: 0 to 50 deg C, 95% RH (non condensing).
  • Power: 96-246V AC, 50/60 Hz, 25VA (approx)
Page 7 of 7