Super User
SCOPE introduces its next generation of iconic SCOT Series Circuit Breaker Time Interval Meters in all new super light avatars, based on cutting edge microcontroller & embedded technology.
User can choose from two models, SCOT M3K+ and SCOT MXP+ depending on type of testing to be done on circuit breakers.
Features
- A radically new design makes SCOT the lightest available CB Time Interval Meter.
- High sampling frequency of up-to 10 KHz offers high timing resolution of 0.1 mS.
- Mains as well as rechargeable Li-ion battery operated. In built battery monitor and cut off circuit for protection against battery deep discharge.
- In built real time clock, memory and printer*. Test time stamping on each record enables time references for future use.
- PC Downloading & Analysis including ‘Trend Analysis’ is possible with “CData SCOT” Software supplied with kit.
- Instrument debug options like contact status check, command check, memory check, printer check*, PC downloading check are provided.
- Simple operation. Tests can be conducted even by technicians.
- Supplied with rugged test lead set, suitable for testing EHV CBs.
- Enclosed in ultra rugged IP67 class hard molded case.The instrument is supplied with CData software CD, Calibration Certificate, and Test leads suitable for testing of EHV class circuit breakers.
- Type Tested as per IEC 60068, IEC 61326 & IEC 61010-1. CE marked
Note: * - These features are available only in SCOT MXP+.
Specifications
| Parameter | SCOT M3K+ | SCOT MXP+ |
| Contact Timing Channels | 3 (Main contacts of 3 poles connected end to end, simultaneously) | 12 ( Up-to 2 Main + 2 PIR contacts per pole, 3 poles simultaneously, i.e. 6 Main + 6 PIR contacts simultaneously) |
| Sampling Speed | 10kC, 5kC, 2kC,1kC & 100C, Selectable | |
| Timing Range | 1Sec, 2Sec, 5Sec, 10Sec & 100Sec respectively for above Sampling Speeds | |
| Resolution | 0.1 mSec, 0.2 mSec, 0.5 mSec, 1 mSec & 10 mSec respectively for above Sampling Speeds | |
| Accuracy | Value ± 0.05% ± 1 digit | |
| Breaker Control | Two solid state contacts rated at 35A, 300V AC/DC for breaker operation | |
| Trigger Options | Close, Open, Close-Open | |
| Display | 4 Line X 20 character backlit LCD | |
| Printer | In-built, 58 mm thermal printer (Available only in SCOPT MXP+) | |
| Keypad | 5 keys | |
| Memory | 1 MB, 100 records, Internal | |
| Inbuilt Battery | Li-Ion, 11.1 V, 4 Ah | |
| Battery Charger | Input Supply - 100 to 300 VAC, 50/60 Hz ± 10% Output Voltage - 13.5 VDC, 1000 mA | |
| Communication Port | USB | |
| Software | CData SCOT - For PC Downloading & Analysis, Windows based | |
| Environment | 0 to 50°C, Upto 95% RH (Non condensing) | |
| Dimensions | 300 x 250 x 200 mm | |
| Instrument Weight | 5 kg | |
- Breaker Control: Two solid state contacts rated at 35A, 300V AC/DC for breaker operation (Close & Trip).
- Trigger Options: Open Close, C-O, O-C, O-C-O, and delay between operations configurable.
- Sampling Speed: 20kC, 10kC, 5kC, 2kC, 1kC selectable.
- Travel Channels: For linear / rotary resistive transducers. 0-5V DC excitation source in-built.
- Communication Port : Ethernet port for communication between laptop and instrument
- Power : 230V AC + 15%, 50Hz + 10%, 70VA Approx
- Test Leads: Suitable to test Loco VCBs. Leads supplied are of suitable length, thickness, insulation quality & mechanical strength. They have colour coded terminators, quick-fit type rugged clamps & identification labels.
- Supplied with suitable Test Leads & aluminium transport case
Published in
Circuit Breaker Testing Equipment
Tagged under
SCOPE introduces its next generation of iconic SCOT Series Circuit Breaker Time Interval Meters in all new super light avatars, based on cutting edge microcontroller & embedded technology.
User can choose from two models, SCOT M3K+ and SCOT MXP+ depending on type of testing to be done on circuit breakers.
Features
- A radically new design makes SCOT the lightest available CB Time Interval Meter.
- High sampling frequency of up-to 10 KHz offers high timing resolution of 0.1 mS.
- Mains as well as rechargeable Li-ion battery operated. In built battery monitor and cut off circuit for protection against battery deep discharge.
- In built real time clock, memory and printer*. Test time stamping on each record enables time references for future use.
- PC Downloading & Analysis including ‘Trend Analysis’ is possible with “CData SCOT” Software supplied with kit.
- Instrument debug options like contact status check, command check, memory check, printer check*, PC downloading check are provided.
- Simple operation. Tests can be conducted even by technicians.
- Supplied with rugged test lead set, suitable for testing EHV CBs.
- Enclosed in ultra rugged IP67 class hard molded case.The instrument is supplied with CData software CD, Calibration Certificate, and Test leads suitable for testing of EHV class circuit breakers.
- Type Tested as per IEC 60068, IEC 61326 & IEC 61010-1. CE marked
Note: * - These features are available only in SCOT MXP+.
Specifications
| Parameter | SCOT M3K+ | SCOT MXP+ |
| Contact Timing Channels | 3 (Main contacts of 3 poles connected end to end, simultaneously) | 12 ( Up-to 2 Main + 2 PIR contacts per pole, 3 poles simultaneously, i.e. 6 Main + 6 PIR contacts simultaneously) |
| Sampling Speed | 10kC, 5kC, 2kC,1kC & 100C, Selectable | |
| Timing Range | 1Sec, 2Sec, 5Sec, 10Sec & 100Sec respectively for above Sampling Speeds | |
| Resolution | 0.1 mSec, 0.2 mSec, 0.5 mSec, 1 mSec & 10 mSec respectively for above Sampling Speeds | |
| Accuracy | Value ± 0.05% ± 1 digit | |
| Breaker Control | Two solid state contacts rated at 35A, 300V AC/DC for breaker operation | |
| Trigger Options | Close, Open, Close-Open | |
| Display | 4 Line X 20 character backlit LCD | |
| Printer | In-built, 58 mm thermal printer (Available only in SCOPT MXP+) | |
| Keypad | 5 keys | |
| Memory | 1 MB, 100 records, Internal | |
| Inbuilt Battery | Li-Ion, 11.1 V, 4 Ah | |
| Battery Charger | Input Supply - 100 to 300 VAC, 50/60 Hz ± 10% Output Voltage - 13.5 VDC, 1000 mA | |
| Communication Port | USB | |
| Software | CData SCOT - For PC Downloading & Analysis, Windows based | |
| Environment | 0 to 50°C, Upto 95% RH (Non condensing) | |
| Dimensions | 300 x 250 x 200 mm | |
| Instrument Weight | 5 kg | |
- Breaker Control: Two solid state contacts rated at 35A, 300V AC/DC for breaker operation (Close & Trip).
- Trigger Options: Open Close, C-O, O-C, O-C-O, and delay between operations configurable.
- Sampling Speed: 20kC, 10kC, 5kC, 2kC, 1kC selectable.
- Travel Channels: For linear / rotary resistive transducers. 0-5V DC excitation source in-built.
- Communication Port : Ethernet port for communication between laptop and instrument
- Power : 230V AC + 15%, 50Hz + 10%, 70VA Approx
- Test Leads: Suitable to test Loco VCBs. Leads supplied are of suitable length, thickness, insulation quality & mechanical strength. They have colour coded terminators, quick-fit type rugged clamps & identification labels.
- Supplied with suitable Test Leads & aluminium transport case
Published in
Circuit Breaker Testing Equipment
Tagged under
SCOPE introduces CBSCOPE – Loco Circuit Breaker Test System; the ultimate solution for testing Loco Circuit Breakers of all types. CBSCOPE is the most complete analyzer for checking the dynamic performance of Loco VCBs; both Single bottle and Double bottle.
Features
- CBSCOPE Measures timings, bounce, and simultaneity of contacts
- Analyses contact travel characteristics for speed, contact gap, overtravel and rebound.
- Displays settings, graphical and tabulated test results.
- Incorporates powerful and practical Windows™ based Test Manager Software to control & operate instrument; also to view, analyse and handle graphical test data on a laptop at high resolution.
- Specially designed test commands for all Loco VCB testing.
- Analysis of test results provides inputs to assess and correct:
- Settings for contact timings.
- Closing and Opening speeds, over-travel, rebound and contact wipe.
- Trip/Close release mechanism settings.
Specifications
| Channels | Configuration | Range | Resolution | Accuracy |
| Contact Timing | 3: 2 for double bottle VCB, 1 spare | Measurement duration 1 mS to 40 Sec at 1 kC, 0.05 mS to 2 Sec at 20 kC | 1 mS at 1 kC 0.05 mS at 20 kC | Value ± 0.05% ± resolution |
| Auxiliary Contacts | 2: Trip/ Holding & Close Coil current | 1, 2, 5, 10, 25 A DC | 0.1% of range at 1A 0.004% of range | Value ± 0.5% ± resolution |
| Voltage (Travel) | 2: Travel characteristics | 0-5 V DC | 1.2 mV at 25A | Value ± 0.5% ± resolution |
- Breaker Control: Two solid state contacts rated at 35A, 300V AC/DC for breaker operation (Close & Trip).
- Trigger Options: Open Close, C-O, O-C, O-C-O, and delay between operations configurable.
- Sampling Speed: 20kC, 10kC, 5kC, 2kC, 1kC selectable.
- Travel Channels: For linear / rotary resistive transducers. 0-5V DC excitation source in-built.
- Communication Port : Ethernet port for communication between laptop and instrument
- Power : 230V AC + 15%, 50Hz + 10%, 70VA Approx
- Test Leads: Suitable to test Loco VCBs. Leads supplied are of suitable length, thickness, insulation quality & mechanical strength. They have colour coded terminators, quick-fit type rugged clamps & identification labels.
- Supplied with suitable Test Leads & aluminium transport case
Published in
Circuit Breaker Testing Equipment
Tagged under
SCOPE offers HISAC Swift - Circuit Breaker Operational Analyser for checking the performance of the circuit breakers. The Analyser contains various intelligent measuring modules designed for measuring parameters such as contact timings of Main/PIR & Auxiliary contacts, Close/Trip Coil Current characteristics and Static Contact Resistance of R, Y & B poles simultaneously. The results can be directly viewed on the TFT touch screen display in graphical as well as numerical form. It is possible to print the graph on built-in thermal printer or download record to PC for further analysis on CPLOT software. This all in one instrument is best suited for gang operated CBs.
Features
- Operations: C, O, C-O, O-C, O-C-O with configurable delays and Static Contact Resistance.
- Setup: Breaker information data entry and system settings are possible through the touch screen keyboard, which automatically invokes when this menu is selected.
- Contact Timing: Channels for 3 Main and 3 PIR Contacts with 0.05mS resolution.
- One internal channel to measure Close and Trip coil current.
- Three multiplexed channels to measure Contact resistance with 0.1μΩ resolution and range up to 2Ω.
- TFT color graphical display with touch screen. Displays the menu which is operated through touch screen.
- Graph is displayed after the operation with full resolution.
- Printout: Through inbuilt, 56mm thermal printer is provided for printing test header, graph and calculation.
- Memory: Provided with 2 MB inbuilt memory. Can store up to 75 records.
- Windows based CPLOT software to download the record to PC through USB connectivity for further analysis & storage.
- Type Tested as per IEC 60068, IEC 61326 & IEC 61010-1. CE marked
Specifications
| Channels | Configuration | Range | Resolution | Accuracy |
| Contact Status | 6: 1 main + 1 PIR per pole, 3 poles Simultaneously | Measurement duration 1mS to 4S @ 1kC, 0.05mS to 200mS @ 20kC | 1mS @ 1kC 0.05mS @ 20kC | Value ±0.05% ± resolution |
| Auxiliary Contacts | 2: Dry / Wet Selectable | 15 to 300V DC (for Wet Channels) | 1mS @ 1kC 0.05mS @ 20kC | Value ± 0.05% ± resolution |
| Coil Current | 1: Trip / Close coil current | 1, 2, 5, 10, 25, 50A DC | 0.1% of selected range | Value ± 1% ± resolution |
| Contact Res. Channels | 3: Multiplexed 3 Channels.10A Max. | 200μΩ, 2000μΩ, 20mΩ, 200mΩ & 2Ω, auto ranging | 0.1μΩ @200μΩ | 1% of range ± resolution |
- Breaker Control: Two solid state contacts rated at 50A, 300V AC/DC for breaker operation.
- Sampling Speed: 20kC, 10kC, 5kC, 2kC & 1kC selectable.
- Plot Length:200mS at 20kC, 400mS at 10kC, 800mS at 5kC, 2000mS at 2kC and 4000mS at 1kC
- Display : 320 x 240 pixel 5.7” color TFT LCD with LED back light, touch screen
- Printer: 56 mm paper width, thermal printer
- Environment: 0 to 50 deg C, 95% RH (non condensing).
- Power: 96-246V AC, 50/60 Hz, 25VA (approx)
Published in
Circuit Breaker Testing Equipment
Tagged under